Welcome to Wiring Guide
Home Security Checklist Article
. For a permanent link to this article, or to bookmark it for further reading, click here.
Troubleshooting Home Lighting Fixtures
from:Most of the time when a light in the home suddenly goes off, it is because the light bulb is blown and upon changing the bulb, the light works again. However, sometimes that is not the case and before you call in an expensive electrician or simply stop using a particular light, there are some things you can easily check yourself.
Check the Bulb
If the light bulb has blown out and you change it and the light still doesn’t work, first, check the light bulb in another light just to make sure it is not a dud. If it does work in another light socket or lamp, then you’ll need to look closer at the fixture you are working on. Take the same bulb that you just discovered does work and try again, this time taking care to make sure the bulb is tightly screwed in the socket. If it still doesn’t work, unscrew it and try again, this time making sure you are screwing the bulb in straight. Now, this may seem funny but the ridges on some older light fixtures can become worn and it can actually be difficult to screw the light bulb in straight and not at an angle. While the bulb will actually fit in the socket this way, it is not making contact and won’t work. If the bulb is screwed in tightly and straight and is still not working, check the tab, which is in the center of the socket. If the tab is not making contact with the light bulb, the light won’t come on. You may have to adjust it slightly in order for it to make contact with the bulb. You can most likely do this by gently pulling up on it but do not jerk it.
Checking Connections
If, after doing all the above, your light is still not working, there are a few more things you can check but you will need to turn off the power to the light to do this. Shut off the breaker that serves the light but don’t touch anything until you test the connections with a voltage tester. You want to make very sure that you have indeed cut the power to the right source. Once that is done, you will want to begin testing connections to see that they are tight and use your voltage meter to test the wires inside the connections also. Test the switch connections and the receptacle connections. By this time, you should have identified the problem but if all else fails, do check the connections at the breaker box as well. You want to be sure and replace or repair the exact fixture that is damaged and so you must test until you identify the source of the trouble. Then you will know exactly what to fix.
Home Security Checklist News
Homeowners insurance
Reviewing your homeowners policy may not rank high on our annual home-maintenance checklist. Yet following the five steps below will save you big bucks now and a lot of grief down the road.After the recent ...
Read more...Save big on homeowners insurance
Reviewing your homeowners policy may not rank high on our annual home-maintenance checklist. Yet following the five steps below will save you big bucks now and a lot of grief down the road.
Read more...Global Radio Frequency Identification (RFID) Technology Industry
NEW YORK, May 16, 2012 /PRNewswire/ -- Reportlinker.com announces that a new market research report is available in its catalogue: Global Radio Frequency Identification (RFID) Technology Industry http://www.reportlinker.com/p098250/Global-Radio-Frequency-Identification-RFID-Technology-Industry.html#utm_source=prnewswire&utm_medium=pr&utm_campaign=Home_and_ This ...
Read more...Congress Mulls President's To-Do List
This week, President Obama made his to-do list and handed out his assignments for Congress: Reward American jobs, not outsourcing Refinancing for responsible home owners Tax credits for small business jobs Clean energy manufacturing Veterans’ jobs corps But are any of the latest items destined...
Read more...Summer Fun, at Home and on the Road
ALEXANDRIA, VA-- - Summertime means family vacations, sleep-away camp and backyard barbecues -- but if you don't plan ahead, it can also mean sunburn and hassles at the airport. The May issue of Diabetes ...
Read more...